Download and Install Yardor Device Hub on Your Warehouse Computer
Device Hub is the free desktop app that connects your label printer and scale to Yardor, so printing and weighing happen right at the dock. Download it for Windows or Mac, pair it once with your warehouse, and plug in your devices.
Install Device Hub on the warehouse workstation computer — the machine at the dock or the packing bench, not on your phone and not on a server. It is the bridge between Yardor in the browser and the physical devices next to you: with the Hub running, Yardor can print labels on your label printer and read weights from your scale as appointments are worked.
Step 1: Download the right installer#
- Open yardor.com → Download. The page shows the current Device Hub version at the top. You can also get there from your warehouse console: Settings has a “Yardor Device Hub” card with a Download Device Hub button.
- Pick your system: Windows (Windows 10 or later, 64-bit) or macOS (macOS 11 or later, Apple Silicon or Intel), and click Download on that card.
- Run the installer on the workstation computer and finish the install the way you would any desktop app.
Step 2: Open the Hub and pair it#
Open Yardor Device Hub on the computer and follow the on-screen steps to pair it with your Yardor warehouse. It takes about a minute and you only do it once per computer: after pairing, this workstation is linked to your warehouse, and the Hub is ready whenever the computer is in use. If you set up a second workstation (another dock, another bench), repeat the download and pairing there — each computer pairs as itself.
Step 3: Connect your printer and scale#
Plug in your label printer and your scale — USB works fine. The Hub finds them for you; you do not configure drivers inside Yardor. After that, label printing and weighing for dock appointments happen right where the work is, from the Yardor pages you already use.
Keeping the Hub current#
The download page always offers the current version and labels it with its version number. An “All versions” link on the same page leads to the full release list — useful if your IT wants a specific earlier installer. When a newer Hub is released, download it from this page and install it over the old one on the workstation; your pairing stays as it is.
Yardor features used in this article#
- yardor.com → Download (Windows / macOS cards, current version label, All versions link)
- Warehouse console → Settings → Yardor Device Hub card → Download Device Hub
- Device Hub desktop app → pair with your warehouse; printer and scale connect by USB